WI 24-Hour Package for Operators in Charge

24 Hour Course

$199.00

Course Description
Course Outline

This 24-Hour Package has been created for Wisconsin Surface Water Operators with the operator-in-charge designation. This package includes the following approved courses:

Piping Systems Part 1
Pumps Part 1
Pump Installation and Maintenance
Introduction to Water Technology
Electrical Safety (NFPA 70E 2021)

Approved By: Wisconsin Department of Natural Resources

Currently Unavailable (877) 724-6150

24-Hour Package for Operators in Charge
- Piping Systems: Part 1 [45 Activities]
  - 01. Piping Systems
  - 02. Fluids
  - 03. Protecting Steam Lines
  - 04. Keeping Fluids Clean and Moving
  - 05. Piping System Maintenance
  - 06. Valves and Fittings
  - 07. Pipe Hangers and Supports
  - 08. Temperature Effects
  - View Additional Activities
    - 09. Piping Insulation
    - 10. Typical Piping Systems
    - 11. Maintenance Considerations
    - 12. Pipes
    - 13. Pipe Schedules and Other Pipe Codes
    - 14. Types of Systems
    - 15. Metal Piping and Characteristics of Metals
    - 16. Pipe-Manufacturing Methods
    - 17. Behavior of Fluids in Piping
    - 18. Piping Applications
    - 19. Maintenance Considerations
    - 20. Joining Pipe
    - 21. Nonmetallic Piping Materials
    - 22. Concrete Pipe
    - 23. Asbestos-Cement Pipe
    - 24. Plastic Pipe
    - 25. Limitations of Plastic Pipe
    - 26. Joining Plastic Pipe
    - 27. Maintaining Plastic Pipe
    - 28. Glass Pipe
    - 29. Maintenance Requirements
    - 30. Tubing
    - 31. Advantages of Tubing
    - 32. Tube Joining
    - 33. Types of Tubing
    - 34. Tubing Applications
    - 35. Plastic Tubing
    - 36. Other Applications and Maintenance
    - 37. Hoses
    - 38. Codes and Sizes
    - 39. Hose Classifications
    - 40. Hose Terminology
    - 41. Reinforced Nonmetallic Hose
    - 42. Nonmetallic Hose
    - 43. Metallic Hose
    - 44. Hose Couplings
    - 45. Maintenance
- Introduction to Water Technology [51 Activities]
  - 01. The Water Cycle
  - 02. Precipitation
  - 03. Surface Runoff
  - 04. Groundwater
  - 05. Lots of Water, but…
  - 06. Water Use
  - 07. Industrial Use
  - 08. Agricultural Use and Waste
  - View Additional Activities
    - 09. Beginning of Waterworks
    - 10. Centuries of Neglect
    - 11. Water Treatment - Beginning to Today
    - 12. Collecting Surface and Ground Water
    - 13. Transmission of Water
    - 14. Why Treat the Supply Water?
    - 15. Types of Treatment
    - 16. Treatment in the Treatment Plant and Distribution
    - 17. Collecting Wastewater
    - 18. Treating Wastewater
    - 19. Primary Treatment
    - 20. Secondary Treatment
    - 21. Tertiary Treatment
    - 22. Basic Properties of Water
    - 23. The Color of Water
    - 24. Measuring Water Color
    - 25. Taste and Odor of Water
    - 26. The Temperature of Water
    - 27. Solids in Water
    - 28. Total Solids in Water
    - 29. Volatile and Fixed Solids
    - 30. Turbidity and Suspended Matter
    - 31. Electrical Conductivity
    - 32. Atoms and Molecules
    - 33. Acids, Bases, and Salts
    - 34. The Ionization of Water
    - 35. Alkalinity
    - 36. Acidity
    - 37. Hardness of Water
    - 38. Other Unwanted Chemicals
    - 39. Dissolved Oxygen
    - 40. Pathogenicity
    - 41. Disinfection
    - 42. Stabilization of Organic Matter
    - 43. Biochemical Oxygen Demand
    - 44. Factors Affecting Growth
    - 45. The Food Chain and Living Things
    - 46. Bacteria
    - 47. Environmental Classifications of Bacteria
    - 48. Bacteria in Treatment Plants
    - 49. Viruses
    - 50. Algae
    - 51. Protozoa and Higher Organisms
- Pump Installation and Maintenance [52 Activities]
  - 01. Force and Work
  - 02. Power and Horsepower
  - 03. Energy
  - 04. Velocity and Acceleration
  - 05. Static Suction Lift
  - 06. Pressure Losses: Friction and Vapor Pressure
  - 07. Available and Required Net Positive Suction Head (NPSH)
  - 08. Checking Pump Capacity and Pumping Hot Water
  - View Additional Activities
    - 09. Computing Pump Power Requirements and Effects of Operational Factors
    - 10. Priming a Pump
    - 11. Uses and Types of Packing and Seals
    - 12. Packing
    - 13. Selecting Packing Material
    - 14. Removing Old Packing
    - 15. Installing New Packing
    - 16. Testing New Packing and Packing Precautions
    - 17. Mechanical Seals
    - 18. Mechanical Seals Versus Packing
    - 19. Types of Mechanical Seals
    - 20. Installing Mechanical Seals
    - 21. Maintaining and Troubleshooting Packing and Seals
    - 22. Installing the Pump and Preparing the Foundation
    - 23. Fabricated Steel Baseplates
    - 24. Checking Shaft Alignment and Grouting the Baseplate
    - 25. Mounting Pump and Motor Separately
    - 26. Compensating for Heat and Installing Auxiliary Pump Drives
    - 27. Maintaining Centrifugal Pumps
    - 28. Inspecting Packing, Seals, and Bearings
    - 29. Motor and Drive
    - 30. Avoiding Common Pump Problems
    - 31. Cavitation
    - 32. Ring Seizure
    - 33. Overheating
    - 34. Pump Operation
    - 35. Scheduling Maintenance and Troubleshooting
    - 36. Preparation, Work Areas, and Rigging
    - 37. Moving a Pump
    - 38. Disassembling a Pump
    - 39. Inspecting Pump Parts
    - 40. Checking Clearances
    - 41. Reassembling a Pump
    - 42. Reinstalling a Pump
    - 43. Types of Rotary Pumps
    - 44. Gear-Type and Vane-Type Rotary Pumps
    - 45. Axial-Flow Pumps
    - 46. Installing Rotary Pumps
    - 47. Aligning Pump and Piping
    - 48. Direction of Rotation
    - 49. Pump Start-Up
    - 50. Maintaining Rotary Pumps
    - 51. Scheduling Inspections and Maintenance
    - 52. Troubleshooting Rotary Pumps
- Pumps: Part 1 [42 Activities]
  - 01. The Development of Pumps
  - 02. Pumping Systems
  - 03. Water Pumping Systems
  - 04. Chemical Pumping Systems
  - 05. Waste Pumping Systems
  - 06. High-Viscosity Material Pumping Systems
  - 07. Solid Pumping Systems
  - 08. Pumping Terminology
  - View Additional Activities
    - 09. Calculating Total Head
    - 10. Horsepower Calculations
    - 11. Total Energy vs Available NPSH
    - 12. Available NPSH vs Required NPSH
    - 13. Pump Performance Curves
    - 14. Head Capacity Curves
    - 15. Curve Families
    - 16. Pump Selection
    - 17. Centrifugal Pumps
    - 18. Pump Part Definitions
    - 19. End-Suction Casing Configurations
    - 20. Split-Case Centrifugal Pumps
    - 21. Double-Volume Pumps
    - 22. Impeller Types
    - 23. Wear Rings
    - 24. Shafts, Bearings, and Sleeves
    - 25. Turbine Pumps Overview and Lineshaft Turbines
    - 26. Can Turbines
    - 27. Submersible Turbines
    - 28. Flow Patterns
    - 29. Axial-Flow Propeller Pumps
    - 30. Mixed-Flow Propeller Pumps
    - 31. Special Propeller Pumps and Turbine Pump Construction
    - 32. Vertical Turbine Pump Application
    - 33. Regenerative Turbine Pumps
    - 34. Introduction to Rotary Pumps
    - 35. External-Gear Pumps
    - 36. Internal-Gear Pumps
    - 37. Lobe Pumps
    - 38. Screw Pumps
    - 39. Vane Pumps
    - 40. Rotary Piston Pumps
    - 41. Flexible-Members Pumps
    - 42. Rotary Pump Installations
- Electrical Safety (NFPA 70E 2021) [50 Activities]
  - 01. Article 90: Sections 90.1, 90.2
  - 02. Article 90: Sections 90.3, 90.4
  - 03. Article 100: Definitions
  - 04. Article 105: Section 105.3
  - 05. Article 110: Sections 110.1110.4
  - 06. Article 110: Section 110.5
  - 07. Article 110: Section 110.6
  - 08. Article 110: Section 110.7
  - View Additional Activities
    - 09. Article 110: Section 110.8
    - 10. Article 110: Sections 110.9(A), (B)
    - 11. Article 110: Sections 110.9(C)-(F)
    - 12. Article 110: Section 110.10
    - 13. Article 110: Sections 110.10110.12
    - 14. Article 120: Establishing an Electrically Safe Work Condition
    - 15. Article 120: Section 120.1
    - 16. Article 120: Section 120.2
    - 17. Article 120: Section 120.3
    - 18. Article 120: Sections 120.4(A)(1-4), Lockout/Tagout Procedures (Part 1)
    - 19. Article 120: Section 120.4(A)(5), Complex Lockout/Tagout (Part 2)
    - 20. Article 120: Section 120.5
    - 21. Article 130: Work Involving Electrical Hazards
    - 22. Article 130: Section 130.5
    - 23. Article 130: Sections 130.7(A),(B),(C)(1-8)
    - 24. Article 130: Sections 130.7(C),(9-15)
    - 25. Article 130: Section 130.7 Tables
    - 26. Article 130, Section 130.7(D)
    - 27. Article 130: Section 130.7(E)
    - 28. Article 130: Sections 130.8(A-D)
    - 29. Article 130: Sections 130.8(E-N)
    - 30. Article 130: Sections 130.9-130.12
    - 31. Article 200: Sections 200.1(1)-(3)
    - 32. Article 205: General Maintenance Requirements
    - 33. Article 210: Substations, Switchgear Assemblies, Switchboards, Panelboards, Motor Control Centers, and Disconnect Switches
    - 34. Article 215: Premises Wiring
    - 35. Article 220: Controller Equipment
    - 36. Article 225: Fuses and Circuit Breakers
    - 37. Article 230: Rotating Equipment
    - 38. Article 235: Hazardous (Classified) Locations
    - 39. Article 240: Batteries and Battery Rooms
    - 40. Article 245: Portable Electric Tools and Equipment
    - 41. Article 250: Personal Safety and Protective Equipment
    - 42. Article 300: Introduction
    - 43. Article 310: Safety-Related Work Practices for Electrolytic Cells
    - 44. Article 320: Safety Requirements Related to Batteries and Battery Rooms
    - 45. Article 330: Safety-Related Work Practices: Lasers
    - 46. Article 340: Safety-Related Work Practiced: Power Electronic Equipment
    - 47. Article 350: Safety-Related Work Requirements: Research and Development Laboratories
    - 48. Article 360: Safety-Related Requirements for Capacitors
    - 49. Informative Annexes A-I
    - 50. Informative Annexes J-R
Course Completion
- Mandatory Questionnaire
- Piping Systems: Part 1 - Certificate of Achievement (1 of 5)
- Introduction to Water Technology - Certificate of Achievement (2 of 5)
- Pump Installation and Maintenance - Certificate of Achievement (3 of 5)
- Pumps: Part 1 - Certificate of Achievement (4 of 5)
- Electrical Safety (NFPA 70E 2021) - Certificate of Achievement (5 of 5)
- Guaranteed Next-Day Reporting

Instructor Bio

Jerry previously served the state of North Carolina as a Level III electrical inspector and provided state-approved electrical training for electrical inspectors at both Alamance County and Guilford County (NC) Community Colleges. Jerry taught the Kentucky state-approved four-year electrical apprenticeship programs offered by the Independent Electrical Contractors (IEC) Trade School and Associated Builders and Contractors (ABC) Trade School, and served the state of Kentucky as a Master Electrician and Louisville Metro Code Enforcement Officer. Jerry is a Certified Distance Education Instructor (CDEI) and NCCER Core and Electrical Curriculum certified instructor. Jerry currently holds North Carolina and ICC electrical inspector accreditations and is recognized by the state of Washington as an approved electrical administrator.

Currently Unavailable

WI 24-Hour Package for Operators in Charge

Course Description

Course Outline

Instructor Bio